Wangeshi - Professional manufacturer of aluminum machine, your ideal strategic partner
Wangeshi - Professional manufacturer of aluminum machine, your ideal strategic partner
Hot saw
It is mainly used to cut off the larger diameter of aluminum rods, or to replace the hot shears in the occasions where the processing requirements of shearing aluminum rods are high.
| Aluminum rod diameter | Φ90-Φ550mm |
| Aluminum rod minimum end length | larger than rod diameter; less than 1800mm |
| Cutting aluminum rod length accuracy | ± 1mm |
| Sawing speed can reach | 30mm/sec |
| Using | spray lubrication |
1.
Compared with hot shear, large diameter aluminum rods can be sawed, and hot saws with a diameter of 550 mm aluminum rods have been designed and manufactured;
2.
The sawing surface has flatness, verticality, high finish, and the hot shear cannot be compared
3.
The deformation of the aluminum rod during the sawing process is smaller than that of the hot shearing machine, and there is almost no deformation; if the peeling machine is combined, the outer oxide layer can be peeled off well;
4.
The length of the saw is more accurate than the hot shear, up to ±1MM;
5.
The replacement of the saw blade is very convenient, and it can be used directly without adjustment after replacement.
6.
Can be equipped with a short rod to improve the yield of the product.
7.
Can process aluminum rods of different diameters without changing tools.
8.
Reduce extrusion time and increase production.
9.
Reduce bubble generation.
10.
The sawing plane has a high verticality and is flat, so that the plane of the mold is evenly stressed, which improves its life.
Custom message
Wangeshi Machinery Equipment Co., Ltd.
Copyright © 2019 Foshan WanGeShi Equipment Co., Ltd. | All Rights Reserved
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist you.
